Canadian owned·Canadian-made water systemsHonest Water systems, built in Barrie, Ontario
Hard water? You already know. Get a softener quote. Locally owned in Keswick, Ontario

Iron & Sulphur Removal for Wells in York, Simcoe & Durham

Orange rings in the toilet, brown laundry, black slime in the tank, a sulphur smell that hits you at the tap. Iron, manganese and hydrogen sulphide are the three most common well water complaints in York Region, and one filter often handles all three.

Overview

Oxidize it, then trap it

Dissolved iron and manganese are invisible in the glass until they meet air, which is why the staining shows up in toilets, tubs and laundry. Hydrogen sulphide is the gas behind the rotten-egg smell. All three respond to the same approach: oxidize them into a solid, then filter the solid out and backwash it to drain.

Modern air-injection and catalytic media filters do this without chlorine or other chemicals. A pocket of air in the top of the tank oxidizes the water as it passes, and the media traps the result. A daily backwash sends it to drain. Sizing depends on the levels of each, the pH, and your peak flow, all of which come from the well test.

Getting iron out first also protects everything downstream. A softener asked to handle more than a trace of iron fouls within a year or two; a UV lamp behind iron-stained water cannot see through it.

  • Air-injection and catalytic media filters, no chemical feed
  • Iron, manganese and hydrogen sulphide in one stage where levels allow
  • pH correction where low pH stops oxidation working
  • Sized to peak household flow so the filter does not bleed through
  • Backwash to drain with proper air gap
  • Media replacement and service on any brand

Related water treatment services

Cartoon of Otto the otter in a blue cap punching a crusty hard water scale monster out of a pipe in a splash of water
Test first
Equipment we install

Iron & Sulphur Filters: systems built in Barrie, Ontario

We standardize on one Canadian manufacturer so parts, media and warranty support are one call away.

Local Conditions

Where iron and sulphur show up in Georgina and York Region

Wells into the Oak Ridges Moraine through King, rural Aurora, Whitchurch-Stouffville and rural Richmond Hill are the classic hard-and-iron wells. Sulphur smell is common in the deeper drilled wells across East Gwillimbury and toward Georgina.

Iron bacteria, which leave a slimy orange or brown film in toilet tanks, are a separate issue that needs the well shocked before a filter will stay clean, and we check for them during the test.

Installation

Where an iron and sulphur filter goes on your well

The iron filter is the first backwashing tank after the pressure tank and sediment filter, ahead of the softener and UV. It needs a drain for the daily backwash and an outlet for the valve. You will hear it backwash for a few minutes, usually in the small hours. There is no salt and no chemical to add; the media lasts years and is replaced when it is spent.

Pricing

What affects the cost of iron & sulphur filters

  • Iron, manganese and sulphur levels, which set the media and tank size
  • pH, which decides whether a correction stage is needed ahead
  • Peak flow, which sets tank diameter
  • Drain and outlet availability near the pressure tank
  • Media life and replacement cost, shown up front

We quote a fixed written price after the well test, for only the stages the results call for.

19
Towns across York, Simcoe and Durham
3
Regions served from Keswick
1
Job: water treatment, nothing else
Nobody needs to live with orange toilets. The filter that fixes it has no chemicals, no salt, and takes an afternoon to install.
Our Process

How Our Iron & Sulphur Filters Service Works

Test the whole well, explain the numbers, treat what is there, then verify it worked.

1

Test Iron, Manganese, Sulphur And pH

The four numbers that decide the media and whether pH correction goes first.

2

Size The Filter

Tank and media chosen for your levels and peak flow, so it does not bleed through when the shower and washer run together.

3

Install After The Pressure Tank

First stage in the train, with backwash to drain and an outlet for the valve.

4

Retest And Set Backwash

We confirm clear water, set the backwash schedule, and note when the media will be due.

Common Questions

Iron & Sulphur Filters Questions, Answered

What homeowners ask before booking.

Can a water softener remove iron? +
Only a small amount, and it shortens the softener's life doing it. Above a low threshold iron needs its own filter ahead of the softener.
The sulphur smell is only on the hot water. Is that the well? +
Probably not. When the smell is only at the hot tap, the magnesium anode in the water heater is usually reacting with sulphate in the water. Swapping the anode fixes it. If both hot and cold smell, it is the well and needs a sulphur filter.
Do iron filters use chemicals? +
The systems we install use air injection or catalytic media, with no chlorine or permanganate feed. Chemical feed systems exist for very high levels but are rarely needed in York Region.
How long does the media last? +
Typically five to ten years depending on iron levels and how well the backwash keeps up. We test at each service and tell you when it is nearing the end.
Book well water testing

Orange stains or a rotten-egg smell?

We'll test the iron, manganese, sulphur and pH, then install a chemical-free filter that ends it.

289-221-5382Call or text to book a time that suits you.

Book well water testing

Tell us where the well is and what the water is doing. The on-site test is free. Lab panels are quoted before we sample.

Thanks, your request has been sent. We'll be in touch shortly, or call us at 289-221-5382.

Prefer to talk now? Call 289-221-5382.

Call Softener quote